The operating process of metal stamping processing:

1. When processing products. Operators should maintain the correct posture and have sufficient energy to work. If they find physical discomfort, it is necessary to immediately leave the work position for personal safety and report to the workshop supervisor or higher-level leaders. When operating, it is important to concentrate your thoughts, stop chatting, and cooperate with each other. Operators should not operate in a state of irritability or fatigue, in order to ensure personal safety, prevent incidents, and ensure safe operation.

2. Before mechanical operation, check if the moving parts have been filled with lubricating oil, then start and check if the clutch and brake are normal, and idle the machine tool for 1-3 minutes. Stop operating when there are mechanical problems.

3. When replacing the mold, the power supply should be turned off first, and the installation and debugging of the mold can only begin after the movement department of the punching machine stops running. After installation and adjustment, manually move the flywheel to test punch twice. In order to prevent unnecessary collision between the machine and the product to be processed, it is necessary to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are sturdy, and whether the edge pressing ring is in a reasonable position.

4. It is necessary to wait for all other personnel to leave the mechanical operation area and remove any debris from the workbench before starting the power supply to start the machinery.

5. During mechanical operations, it is prohibited to reach into the slider operation area and to use hands to pick up or place workpieces. It is necessary to use standardized materials when taking and placing workpieces in the stamping die. If abnormal mechanical noise or machine malfunction is found, the power switch should be immediately closed for inspection.